We have a Beko ASPM341PX fridge freezer with built in water dispenser. When you push back on the pad/lever (or whatever it is called) it doesn't always work. If you push up on it slightly (on the ridges) then it works. I was trying to remove everything to take a look at the issue and try and repair it.
I was able to remove the front control panel to expose everything behind, however I couldn't figure out how you can get anything else out. It looks as though the section that releases the ice through needs to come out before anything. I removed all screws but couldn't get it to move at all. Has anyone got ideas? I checked inside the door and can't find anything where it may be fixed from the other side.
I expect all of the bottom casing will need to be removed to get to the pad but that seemingly can't come out until the component above it.
I don't want to risk breaking anything.
I was able to remove the front control panel to expose everything behind, however I couldn't figure out how you can get anything else out. It looks as though the section that releases the ice through needs to come out before anything. I removed all screws but couldn't get it to move at all. Has anyone got ideas? I checked inside the door and can't find anything where it may be fixed from the other side.
I expect all of the bottom casing will need to be removed to get to the pad but that seemingly can't come out until the component above it.
I don't want to risk breaking anything.