Best way of getting rid of tree stump (that’s out of the ground)?

cdbe said:
I dog out a Biggie, by hand, took me weeks. Winched it onto my trailer, took it to the tip and they sent me down the bottom bit (where the bin lorries empty) into a huge building that absolutely stank - we manhandled it off the back onto the floor. On the way out they gave me a weighbridge ticket - the stump weighed in at 600kg!

View attachment 305216
Click to expand...
You did well, I can see the pride on your face and you're a lot younger than I imagined you to be.
 
Trim the roots; dig a hole and bury it. The wood will rot away soon enough and it'll attract bugs that'll feed the birds. It's a shame there's no moss since it'd soon spread nicely across the earth.
 
I wonder what a stump grinder would have charged.
 
Leave it to dry out then whack it to shock the mud off before using the chainsaw. A hammer and cold chisel or crow bar may help removing dry mud.
 
Last stump grinder bloke i used (8 years ago) was about £120 to grind out an elm stump a metre in diameter. Took the machine about 2 hours, gave me a huge pile of wood chips to get rid of. The machine was a little tracked thing, weighed about 4 tons - it needed that weight.
 
lostinthelight said:
NSS! but true, the majority of commonly towed wood chippers are in the 4” to 8” range
Click to expand...
I thought i'd just make it clear in case the OP didn't know how a wood chipper works.

Even the big ones at 10" wouldn't take anything like a stump. Wrong tool for the job. That's what stump grinders are for!
 
I took a load of trees out of my garden and I was left with two sizeable stumps that I could not get rid of for firewood/stumpery. I crammed one into an oil barrel planter so it's now feeding a fruit tree and the other one eventually went in a skip we had for other stuff.

Not suggesting it but some helpfulnsof recently put their tree cuttings behind their fence in the no man's land between theirs and mine
 
kingandy2nd said:
but trying to avoid the manual labour if possible!
Click to expand...
I'm not sure that is possible.

I would start by cutting off as many roots as possible with a pair of loppers. As well as removing some weight that will let the soil dry a bit more, or let water in more if you use a pressure washer. Also it will make it easier to see the structure.

Next I would employ a demolition saw to cut off whatever is possible. For mine I use 5TPI and even 3TPI blades that get through wood pretty fast.

There seem to be a lot of thickish roots that can be removed using a demolition saw. More significantly, IMO, there are a lot of, for want of a better word, sub-trunks rather than one massive single trunk. So you may be able to get quite a bit of weight off that way, as well as opening it up more.

In between each lot of cutting I would give it a good few blows with, say, a sledgehammer to knock loose any dirt which is now dry or free.

If you can get the weight down enough to make it moveable then any of the possible ideas (giving away, taking to the dump, burying, etc) become possible / easier.
 
You must log in or register to reply here.
Back
Top