That got you all going.....
Not nearly as interesting as it sounds. Tiling 3 sides for a shower & in one corner of the back wall I've left a gap a bit wide between tile and wall (8mm ish). When the tiles from the perpendicular wall meet this one, the faces will only overlap by about a millimetre in depth so there's really an L shaped gap to grout/silicon (Pics would help but I'm not there at the moment).
At the moment the gap is accessible (I haven't put the last run on the side wall yet). What's my best way forward;
1 Grout the gap in the back wall tiles then do last side run
2 Silicon the gap in the back wall tiles then do last side run
3 Do last side run & fill the whole L shaped gap as a oner with grout/silicon, it'll be fine
Apologies for shoddy not to scale Paint picture
Not nearly as interesting as it sounds. Tiling 3 sides for a shower & in one corner of the back wall I've left a gap a bit wide between tile and wall (8mm ish). When the tiles from the perpendicular wall meet this one, the faces will only overlap by about a millimetre in depth so there's really an L shaped gap to grout/silicon (Pics would help but I'm not there at the moment).
At the moment the gap is accessible (I haven't put the last run on the side wall yet). What's my best way forward;
1 Grout the gap in the back wall tiles then do last side run
2 Silicon the gap in the back wall tiles then do last side run
3 Do last side run & fill the whole L shaped gap as a oner with grout/silicon, it'll be fine
Apologies for shoddy not to scale Paint picture