Bosch Dishwasher fault

Alison556

Alison556

Joined
6 Dec 2007
Messages
1,424
Reaction score
28
Location
Dundee
Country
United Kingdom
I've got a Bosch SPV25CX00G dishwasher. I've just ran a dishwasher cleaner through it and it's just sitting there chuntering away like it's trying to drain but nothing is happening.
There is no water in it, but there is a fair bit of soapy suds and the tap warning light is flashing. I've cleaned the filter in it (it wasn't dirty) and there's no kinks in the hoses (nothing has moved since it was installed). I'm at a loss.

Anyone any ideas please?
 
When did it last run correctly?

Do you mean the cabinet is full of foam?

Post a pic of the drain hose where it goes into the waste pipe.
 
Accidentally turned water supply tap off? Did water enter the machine, or is it just not draining away?
 
Chances are your foaming cleaner has spilled into the base and triggered the anti flood.
 
I ran fine this morning. After I'd done the dog's bowls, I put a bottle of cleaner in it. There's just a bit of foam in the bottom, but the drain bit where the filter is is three quarters full of foam.
I had switched it off at the mains and went to check on it. The suds had subsided a bit and the flashing tap had stopped, so I set it on a rinse and it's working fine
 
You must log in or register to reply here.
Back
Top