Bosch WFF2000 not filling from hot valve

L

Laserbill

Joined
1 Feb 2016
Messages
3
Reaction score
0
Country
United Kingdom
Hello,
I have a WFF2000GB/12 bought new in 1997, its been a great machine.
I have changed the Carbon brushes twice.
It is supposed to be a hot and cold fill but the hot fill is not working (I don't know it ever has)
I have checked the hot fill solenoid and there is no power from the main board to energise it.
the connecting cable is OK as I have checked the continuity with an Ohm meter.
The valve is OK as it operates when jumpered to the cold fill solenoid's electrical feed.
Has anyone else seen this? does it sound like the main board?
Washer still works using the cold fill but would like to get to the bottom of this.
any help would be appreciated.
Thanks for a great site

Bill
 
Thanks for the advice, I will try at 90 deg and report back.
Should the hot valve open on a 40 deg wash?
One more question if you don't mind, there never seems to be much water in the drum after the initial fill, even on the higher water level. I have noticed from the videos posted on YouTube showing the WWF2000 in action the water level is above the bottom of the door, this is never the case with my washer.
What determines the water level?
Regards
Bill
 
Last edited:
You must log in or register to reply here.
Back
Top