"was that the kettle boiling, i heard" no sugar please
Bottom of door is rubbing
- Thread starter Keitai
- Start date
Poor Keitai gets a right kicking in these threads.
The problem is householders stand no chance of getting a fully skilled carpenter to do these jobs, so there is a big demand for handyman services - the problem is often these little repair jobs need a lot of experience and kit to do them proud.
Keitai does ask advice where he isn’t sure, so he clearly wants to learn….I don’t think that’s the sign of a cowboy.
The problem is householders stand no chance of getting a fully skilled carpenter to do these jobs, so there is a big demand for handyman services - the problem is often these little repair jobs need a lot of experience and kit to do them proud.
Keitai does ask advice where he isn’t sure, so he clearly wants to learn….I don’t think that’s the sign of a cowboy.
Bl@@dy customers always show up at inopportune moments, I find using a noisy chop saw spraying sawdust everywhere gets them away."was that the kettle boiling, i heard" no sugar please
I agree with the thrust of your post. I take the pee out of some of his posts but I respect the fact that he comes here to ask for advice when he is not sure. The corollary, potentially, would be someone that does a carp job and doesn't care enough to ask.
D
Deleted member 174758
Routers and power planers are even better (louder)!
I suggested a chainsaw to trim this door...
I was going to recommend training a colony of beavers to chew the bottom off (and yeah- I googled "beaver collective noun").
Well, if it is any consolation, I agreed to fit an internal door, one of those lightweight one on a new extension.
All was there, the door, the door frame and all the hardware.
However, the builder (pardon me, the bodger) had left the opening at 31 inches x 78 inches.
As you know, those doors can't be trimmed much, so I ended up wasting half a day cutting walls and modifying the door structure for something which should've taken an hour or 2 at worst.
Lots of swearing went on...
This is the bodger who doubled his original quote for "unexpected problems".
The toilet overflows because the waste pipe goes up instead of down, half of the spotlight don't work, the oven trips the mcb, the dpc is same level as the garden paving and don't get me started on the laminate floor which looks like the Sahara dunes with lots of silicone in badly trimmed edges.
How the heck he's gonna get BC to approve that rubbish is beyond me.
Or, a complacent private BC will just pass everything for a few bobs.
I came home and opened a bottle of Jack.
Never again!
Given the state of the door, frame and surrounding area, it's doubtful that any satisfactory repair can ever be made.
No get a five lever insurance approved mortice lock and start again. Otherwise you will jeopardise front door security and possibly the home insurance.
I'm assuming the elderly client can't afford a new door/frame to be fitted by a professional.
Happy New Year
Blup
I'm assuming the elderly client can't afford a new door/frame to be fitted by a professional.
Happy New Year
Blup
I've got a multi too and reciprocating saw both with metal blades
D
Deleted member 174758
Wrong tools for this sort of job. A four square file (with a handle fitted) is probsbly a better bet if you need to modify the keep. A 6 to 8in four square and an 8 to 10in 2nd cut flate file (both fitted with handles!) are handy additions to any toolkit. Not everything can be done with power tools!
Happy New Year (when it arrives)!
I did it with a dremel and a diamond bit.
In the OP's case, I think it's more effective to fix the wonky door by deepening the recess the top hinge is sitting in. That will correct the keep as well as the lock.