Candy cdi 1020 Dishwasher not working

M

MissLauraLou

Joined
20 May 2017
Messages
4
Reaction score
0
Location
Kent
Country
United Kingdom
Last night I loaded the dishwasher as usual and selected the programme (p4), and then it started beeping and the lights for programme 1 and 2 were flashing. So I then tried again I turned the dishwasher off and then back on and set it to p4 and it did the same so I then turned it off again and tried p3 and it worked. I have no clue what is wrong with programme 4. Has anyone got any idea what could be wrong?

Thank you in advance.
 
Yes I have tried cleaning the filter and making sure there is plenty of salt in there.
 
I had a look on the candy website, but there doesn't seem to be 1020 model. Soap boxes are normlly operated by a jet of water, not eletronically, so I'm surprised it's not opening; there's a button on the bottom that you press isn't there.
 
Sorry it's a CDI 1012/B and the machine starts as normal and sounds like it's working except I don't hear the detergent box spring open and then after about 10 mins it starts beeping constantly. When I open it p1 and p2 are flashing simultaneously.
 
Dishwashers normally go through a cold cleaning cycle to get rid of food waste on the plates, then the detergent box opens. It's the jets on the rotating arms that open the detergent box, so take the arms off, and make sure the ends aren't blocked.

Here's a link to the manual. You need to look at the cleaning and maintenance section, and then fault signals on page 25. If you can't solve it from there, then it's a service call I'm afraid.
 
You must log in or register to reply here.
Back
Top