cant set alarm

D

daden

Joined
12 Mar 2007
Messages
35
Reaction score
0
Location
Essex
Country
United Kingdom
hi guys
i wonder if u could give me a bit of help me and my friend friend fitted my alarm about 3 years ago worked prefect until i need a senor extened though to my conseraty and one altered in kit(knocked walls down and stuff)none of the little red lights flash now when alarm is set now ie bang in code it just flashs up zone 1 2 3 4 but not garage is is hard wirerd on metal strip which is zone 5 i have checked wires and looks ok spoke to mate he said it could be senors so not sure the alarm is a ACCENATE any help guys would be most appeated thanks mark
 
simple.

a cable has benn cut / damaged taking out the auxialry fuse, all detectors do not work because they have no power, the gargage works becuse it requires no power
 
thanks brezzer now i no what im looking 4 i have a go but i put a new ceiling up so could b tricky
 
brezzer i went to main box in loft checked fuses one blown replaced all working prefect now YOU THE DADDY CHEERS!
 
Thought they are 1.6A in Accenta??

The l/h one protects bell/strobe & 13V output, and the r/h one protects the battery.

Make sure you have the right one. If not, it will not offer your system the right protection.
 
You must log in or register to reply here.
Back
Top