CAST IRON TOILET WASTE COLLAR DOES NOT FIT THROUGH BACK TO WALL TOILET

[davphi338]

HI,

Renovating my daugters bathroom and she has purchased this back to wall toilet from wickes.

Wickes Bellante Toilet Pan, Cistern & Toilet Seat | Wickes.co.uk

Wickes Bellante Toilet Pan, Cistern & Toilet Seat

www.wickes.co.uk

The issue I have is that the collar on the cast iron soil pipe does not fit through the opening on the back of toilet. I can lift the pan over the collar and lower the pan down but then theres is no space to get my hands in to make the connection between pan and waste.

Do youy think it would be possible to fit a mcalpine flexiwaste such as the item below and there would be enough flexibility in the connector to fit it into place and then lift the pan to get over the soil pipe collar?

Straight Back to Wall Flexible WC Connector | McAlpine Plumbing

Optimize your WC connector setup with the Straight Back To Wall Flexible WC Connector, ensuring flexibility and efficient water flow.

mcalpineplumbing.com

Or is it better to bite the bullet and try cutting of the collar with a reciprocating saw and carbide blade.

https://www.amazon.co.uk/gp/product/B08FQPX2VD/ref=ox_sc_saved_title_6?smid=A11KYN7XBUYURO&th=1

Thanks for any advice as I've never cut a cast iron soil pipe before.

 

[denso13]

Cut the cast closer to the wall and fit a flexible connector. Connect the pan then push it back into place.

Check the size of the cast for which one you need. https://www.screwfix.com/p/viva-slinky-fit-flexible-straight-wc-pan-connector-white-240-500mm/120HR

 

[HERTS P&D]

You will need one of these:

https://www.screwfix.com/p/milwaukee-48005202-metal-sawzall-blade-230mm/393HH?kpid=393HH&cm_mmc=Google-_-Datafeed-_-Tools?kpid=KINASEKPID&cm_mmc=Google-_-TOKEN1-_-TOKEN2&gad_source=1&gclid=CjwKCAjwko21BhAPEiwAwfaQCNNjYekuzrSyGqimBLcG5ZoWpHvbj1jGkG8fohDItbmjVOMXFCVzwBoC1OcQAvD_BwE&gclsrc=aw.ds

Fitted to a sawzall.

Andy

 

[Mottie]

NO NEED TO SHOUT.

 

[Deleted member 317380]

Cut the cast closer to the wall and fit a flexible connector. Connect the pan then push it back into place.

Will it clear the vent stack part?

 

[denso13]

Yes, no problem. Just need to check the available length for the connector, there are a few options.

 

[HERTS P&D]

https://www.screwfix.com/p/mcalpine-wc-f26r-flexible-wc-pan-connector-white-97-107mm/71219?gclsrc=aw.ds&ds_rl=1249404&gad_source=1&gclid=CjwKCAjwko21BhAPEiwAwfaQCFpAT9zmjotpmAGqEXSaC70Gq6flWLubwxO6mrSIKMq-TjJUI8F1KBoCs8sQAvD_BwE&gclsrc=aw.ds

These can also be made shorter.

Andy

 

[Madrab]

Or one of these, if you don't have a sawzall (reciprocating saw) but do have an angle grinder

Norton Stainless Steel Metal Cutting Disc 4 1/2" (115mm) x 1mm x 22.23mm - Screwfix

Order online at Screwfix.com. Aluminium oxide cutting disc ideal for cutting all metals. Reduced noise, less dust and minimal workpiece wastage. FREE next day delivery available, free collection in 1 minute.

www.screwfix.com