I’m installing some IP68 RGBW LED strips in a bathroom ceiling where the centre part of the ceiling is dropped slightly to create a wall wash effect around the perimeter of the room.
Strips will connect to a centre point above the ceiling. Ideally I’d like to find a combined LED controller & PSU unit to minimise the number of cable connections & failure points. Does one exist?
If possible the controller would need RF and/or WiFi connectivity so LED strips can be controlled remotely.
Strips will connect to a centre point above the ceiling. Ideally I’d like to find a combined LED controller & PSU unit to minimise the number of cable connections & failure points. Does one exist?
If possible the controller would need RF and/or WiFi connectivity so LED strips can be controlled remotely.
