There is an issue with the lights on my Lamona Curved Glass Chimney Extractor and I had an engineer visit.
He wasn’t able to remove the decorative chimney surround and suggested I need a joiner to remove the kitchen panels above, which I’m not keen on.
The surround catches on the raised bit as shown in the photo and would also likely catch on the control panel.
Any ideas how I can remove the surround please?
He wasn’t able to remove the decorative chimney surround and suggested I need a joiner to remove the kitchen panels above, which I’m not keen on.
The surround catches on the raised bit as shown in the photo and would also likely catch on the control panel.
Any ideas how I can remove the surround please?
