We recently had a loft conversion which meant we had to nick a bit off the box room for the stairs. They’ve rebuilt the stud walls which means that it’s now a couple off feet further into the room.They left the coving insitu and just cut it off at 90 degrees and butt the new wall up to it. This means that I’ve lost the internal corner (of the current coving) to which i need to ‘re-cove’ into as the coving now buts up to the new wall with no mitre, if you see what i mean. So how am I going to scribe the new length into the corner as I’ll have to take into account a 45 degree cut but also scribe the curve of the existing coving. A bit difficult to explain really! Can anyone advise how I’m gonna cut this complex shape as it not your usual 45 degree cut so a cove mitre is not gonna work. Any advice please as its doing my head in !! Thanks
Coving issue with a difference
- Thread starter Rob2125
- Start date
-
- Tags
- coving mitre cuts scribing
You can cut the new piece of coving so it butts up against the existing one, but rather than having a nice 45 degree angle, start with 90 degrees than you need to cut it using a thin serrated blade to match the contours of the existing piece that is stuck on the wall. It will slide in from the side and butt up against it rather than meet at a 45 degree joint.
I would take a smallish piece of coving and hold it at 90 degrees to the piece you plan to use and scribe the shape onto it - maybe practice on off-cuts first so you can offer it up to the existing piece and assess how well it fits.
You can fill in the little gaps that will probably happen this way with some plaster of Paris.
That's how I've done it in the past anyway - less hassle than pulling the existing piece down, but still a bit of a pain.
I would take a smallish piece of coving and hold it at 90 degrees to the piece you plan to use and scribe the shape onto it - maybe practice on off-cuts first so you can offer it up to the existing piece and assess how well it fits.
You can fill in the little gaps that will probably happen this way with some plaster of Paris.
That's how I've done it in the past anyway - less hassle than pulling the existing piece down, but still a bit of a pain.
I just saw this is a question asked/answered on another thread:
https://www.diynot.com/diy/threads/cutting-already-fitted-coving.264404/
Better answers on there I think
https://www.diynot.com/diy/threads/cutting-already-fitted-coving.264404/
Better answers on there I think
Cut has to be 45 degrees thru both planes, coving mitre box helpful.
- Joined
- 31 Oct 2019
- Messages
- 1,423
- Reaction score
- 225
- Country
It's the same technique used when cutting internal corners on skirting board
Plenty of YouTube videos on how to do it , just practise on scrap coving first it can take a while to get your head around it (took me a while!)
Plenty of YouTube videos on how to do it , just practise on scrap coving first it can take a while to get your head around it (took me a while!)