I have our Dimplex Danville optimyst fire for about 5 years now. The flame effect has always been a bit of a pain. I've had to replace the transducer discs from time to time, and replaced the transducer itself, but after a few months it plays up again.
Once again it stopped producing mist, so I bought another new transducer unit. It worked for about 10 minutes and stopped producing mist. So I bought a new fan. As soon as I fitted the fan, it started producing mist far better than it had ever done. Success at last!
Put it all back together, and 10 minutes later it stopped producing mist - permanently. So it's got a new transducer, and a new fan, but still not working.
Any ideas what else could be the problem?
Once again it stopped producing mist, so I bought another new transducer unit. It worked for about 10 minutes and stopped producing mist. So I bought a new fan. As soon as I fitted the fan, it started producing mist far better than it had ever done. Success at last!
Put it all back together, and 10 minutes later it stopped producing mist - permanently. So it's got a new transducer, and a new fan, but still not working.
Any ideas what else could be the problem?