- Joined
- 23 May 2020
- Messages
- 8
- Reaction score
- 0
- Country
Hi all
Fitting downlights in my bedroom. Located joists, went between them, drilled hole. Went to other side of room, same spacing, drilled hole, found myself directly in the middle of a noggin (i.e. a small piece of wood running between the joists to support the plasterboard edges).
We've recently had an extension built with the same roof type and no noggins at the edges of the plasterboard.
My question is, can I remove the noggin that I've already drilled in to? I can't see what use it has...
Thanks!
Fitting downlights in my bedroom. Located joists, went between them, drilled hole. Went to other side of room, same spacing, drilled hole, found myself directly in the middle of a noggin (i.e. a small piece of wood running between the joists to support the plasterboard edges).
We've recently had an extension built with the same roof type and no noggins at the edges of the plasterboard.
My question is, can I remove the noggin that I've already drilled in to? I can't see what use it has...
Thanks!