EDPM Roof, and other quandaries...

C

charliegolf

Joined
7 Jan 2014
Messages
3,328
Reaction score
516
Location
West Glamorgan
Country
United Kingdom
Hi All

I have just put up a sips garden room shell made from 97mm sip panels, roof included.

I'm scratching my head over fascias. They don't come in 97mm seemingly! Therefore,

Do I cut the fascia back to flush with the roof deck, and just carry on with the rubber roof install? Or is ther a better product for such a small thickness?

If yes, cut em down, which is the best way to cut them? Blade and snap/saw?

Thanks.
 
Fascia goes flush with the deck with epdm trims and can overhang the joists, soffit at the bottom.
 
charliegolf said:
Hi All

I have just put up a sips garden room shell made from 97mm sip panels, roof included.

I'm scratching my head over fascias. They don't come in 97mm seemingly! Therefore,

Do I cut the fascia back to flush with the roof deck, and just carry on with the rubber roof install? Or is ther a better product for such a small thickness?

If yes, cut em down, which is the best way to cut them? Blade and snap/saw?

Thanks.
Click to expand...
What type of 'fascia' are we talking here?
 
charliegolf said:
9mm plastic cover boards. Sorry, an important detail!
Click to expand...
you could cut down 150mm fascia boards -circular saw is probably quickest way

or use them full size and batten below for the fascia

I would have a look at how much room the gutter and brackets take up before deciding
 
You must log in or register to reply here.
Back
Top