Enforcer Zones and Input Types

M

monsterink

Joined
2 Jan 2014
Messages
91
Reaction score
2
Location
Essex
Country
United Kingdom
SO i have installed my alarm, and wireless PIRs and Door contact. with the exception of a faulty delta bell.


My setup

I have :-
3 PIRs
1 DOOR Contact
1 Wireless Keypad (Arming Station) - in the entrance hall
2 Wireless Key-fobs

MY main unit is in the utility room. my issue is

"I want to be able to arm all of downstairs, and use/sleep upstairs at night" they call this Night Set-

PIR 1 Entrance Hall - Zones AB input type - Entry Route ??????
PIR 2 Lounge - ZONES AB Input Type - Intruder
Door Contact (Front Door Entrance) Input Type - Final Exit - Zones AB
and
PIR 3 Landing to cover all Bedroom doors (upstairs) Zones A Input Type Intruder

When i arm downstairs zone B and run up all is fine. get 30 seconds to leave.

When i come down in the morning the alarm goes straight off (As it its sounds) I need to enable some kind of Grace Period.

What am i doing wrong. what is the correct input type for PIR 1 ???
 
upload_2016-8-15_10-38-31.png

upload_2016-8-15_10-38-53.png


ive tried 09 & 10 but don't quite understand what they mean ? in the context of Night Set
 

Attachments

  • upload_2016-8-15_10-38-10.png
    upload_2016-8-15_10-38-10.png
    197.7 KB · Views: 323
It needs to be 09 ER Part entry exit , this will start your entry exit timer in part set
 
thx, i tired as you suggest, thou i had no luck, maybe there is another overriding config i am missing.

will try again, but happy to hear any more suggestions.
 
Last edited:
Am expecting to trigger a timer for 30 seconds once Ive activated the pir in the hall pir 1. Input type 09
 
Either you didn't program it correct or you didn't part set it , I've programmed loads of these and euro mini panels ( same programming ) does the lounge detector look into the hallway ?
 
Ill have another Go tonight, perseverance is my middle name.

Thanks for the tips. Will report back
 
Marka

So the entery route to pir 1 on nightset zone B now works as expected. Grace period is given. I've even enabled the volume on entry and exit.

New issue

Can still only disarm zone B nightset using, fob key. Unlock button.

Can you explain what flexiset is. Why use it, how to use it. I've created a separate user to use a code to arm and disarm at the keypad in the hall way.
 
Are you saying code won't disarm sytem in B ? Set new user enter new code eg 5678 then yes to all options
 
I just read you msg this morning, without created a new acc. I tried the below.

Note: I am trying this on the wireless keypad in the hall.

Arm and disarm zone A immediately works.

Arm then leave then come back and try disarm does not work.

Its possibly to do with either the account or keypad setting, auto wake etc

Off to work now. Back in the eve. Danka

Thanx will report back.
 
Marka here are the results

Still cannot disarm the alarm when coming down stairs during the grace period. Can only disarm from the keypad once the alarm is sounding. You will agree this is not a viable option.

Strangely

Programming a wireless keyfob allows me to arm and disarm during grace.

Programming a proxy tag again allows me to arm and disarm during grace.

I strongly think this is a software issue. I will get back onto the supplier and pyronix. The combination of enforcer and wireless keypad /arming station is new.

What do you think ?
 

Attachments

  • IMG_0189.JPG
    IMG_0189.JPG
    99.8 KB · Views: 210
You must log in or register to reply here.
Back
Top