Ext Hardwood Door 73 x 198cm not veneer

Diyisfun

Diyisfun

Joined
15 Jun 2004
Messages
7,343
Reaction score
328
Location
Norwich
Country
United Kingdom
Looking to replace my Front Door.
Apart from getting one made anyone know where I can get this or slightly bigger than can be cut down
 
Diyisfun said:
Looking to replace my Front Door.
Apart from getting one made anyone know where I can get this or slightly bigger than can be cut down
Click to expand...
If it's a Victorian door or similar, try a reclamation yard.
You may also be able to find what you're looking for on eBay.
 
No its not Victorian. I have found doors that are about 32mm to wide so I think that may be ok.
 
Diyisfun said:
No its not Victorian. I have found doors that are about 32mm to wide so I think that may be ok.
Click to expand...
It depends on the door construction. Normally taking 16mm off each side will leave you with a door where the stiles look a bit narrow, but you may find that the tenon wedges need to be replaced when you make such a deep cut. What does the manufacturer say?
 
Last edited by a moderator:
I make that about a 29" door, is that right?

30" is the next nearest common size.

is the old door a tight fit in the frame?
 
The current door is a nice fit.
I will ask the supplier the question you suggested. Thanks.
 
You must log in or register to reply here.
Back
Top