Hi guys,
I like a little diy hence why I'm here.
So to cut costs I removed old concreted in 4 × 4 8ft posts and replaced them with 8ft 10"
On hindsight I should've sourced 10ft posts for a sloping garden.
Because next door has decking I should've measured at least the distance from decking upwards to at least 6ft. Then add that to distance between decking and top of hole then add depth of hole 2ft.
Stupid me. The height from decking to top of post is 5ft 6".
I'm 6 to 10" short of where I want the height to be as the fella next door is 6ft.
In the attached photos I've replaced a section of fence. The new post on the end of that section that will start the run of new fence needs extending as well as next one. I've bought a new 7ft post and cut off 15" each end so that the perfectly flat end joins top of posts. I can then hang rails.
I'm looking for a galvanised nail plate. Possibly 100mm × 150 or 200mm.
Can anybody recommend one? Or suggest alternative? I'm not keen on extender that fits over each end as that's normally for a broken post or if you're after a really rigid fix. Also it would stand out too much.
Look forward to any help. Thanks.
I like a little diy hence why I'm here.
So to cut costs I removed old concreted in 4 × 4 8ft posts and replaced them with 8ft 10"
On hindsight I should've sourced 10ft posts for a sloping garden.
Because next door has decking I should've measured at least the distance from decking upwards to at least 6ft. Then add that to distance between decking and top of hole then add depth of hole 2ft.
Stupid me. The height from decking to top of post is 5ft 6".
I'm 6 to 10" short of where I want the height to be as the fella next door is 6ft.
In the attached photos I've replaced a section of fence. The new post on the end of that section that will start the run of new fence needs extending as well as next one. I've bought a new 7ft post and cut off 15" each end so that the perfectly flat end joins top of posts. I can then hang rails.
I'm looking for a galvanised nail plate. Possibly 100mm × 150 or 200mm.
Can anybody recommend one? Or suggest alternative? I'm not keen on extender that fits over each end as that's normally for a broken post or if you're after a really rigid fix. Also it would stand out too much.
Look forward to any help. Thanks.