J Jeramy Joined 1 Oct 2019 Messages 46 Reaction score 0 Country 26 Feb 2024 #1 Hi i have just updated my Flex 100 firmware and have reprogramed the rf zones and hopefully everything else. But its thrown up an "aux tamp 004" error. Any ideas on how to remedy it. Thanks in advance, Jeramy
Hi i have just updated my Flex 100 firmware and have reprogramed the rf zones and hopefully everything else. But its thrown up an "aux tamp 004" error. Any ideas on how to remedy it. Thanks in advance, Jeramy
G GalaxyGuy Joined 7 Jan 2014 Messages 1,013 Reaction score 162 Location Fife Country 26 Feb 2024 #2 If you used RSS, you didn't perform a full copy before then making a change and overwriting. Did you use RSS?
If you used RSS, you didn't perform a full copy before then making a change and overwriting. Did you use RSS?
J Jeramy Joined 1 Oct 2019 Messages 46 Reaction score 0 Country 26 Feb 2024 #3 unfortunately i cant afford RSS
G GalaxyGuy Joined 7 Jan 2014 Messages 1,013 Reaction score 162 Location Fife Country 26 Feb 2024 #4 Ok, it may be that you have made a change in error. The tamper is caused by the siren output setting 51.81. Change it from siren to Relay.
Ok, it may be that you have made a change in error. The tamper is caused by the siren output setting 51.81. Change it from siren to Relay.
J Jeramy Joined 1 Oct 2019 Messages 46 Reaction score 0 Country 26 Feb 2024 #5 Bloody brilliant that worked a treat. thank you so much
