Hi, I have an error message "comm fail rec. 4" on my keypad. I installed the alarm and it is connected to the internet for push notifications and that works fine. Anyone got an ideas about this? I take it the rec. 4 is short for receiver 4? So maybe i've miss programmed something in the communications menu [56]. Thanks, Jeramy
Galaxy Flex comm fail rec.4
- Thread starter Jeramy
- Start date
How many receivers have you configured ? They will be listed in menu 56 Comms -> Receivers. Check the 4th receiver to see what you've set as. It's easier to program and check programming if you have Honeywell RSS.
- Joined
- 16 Aug 2020
- Messages
- 27
- Reaction score
- 0
- Country
I had something similar, see here how I fixed but your error message looks slightly different.
www.diynot.com
Galaxy Flex 20 & GPRS +LINE FAILCOM4
Hi all, I blame the long cold snap, but out of the blue after 10 years of faultless service, my Flex 20 with a GPRS module has thrown a dreaded +Line Failcom4 unclearable fault. I've tried an engineer reset (51.17.1) and a shutdown (51.17.5), unplug module, restart, shutdown and plug back in...
www.diynot.com