Garden Gate keeper

R

RickH

Joined
10 Dec 2008
Messages
849
Reaction score
17
Location
Jersey Marine
Country
United Kingdom
I have 2 heavy garden gates .... they have the typical latches that auto-latch the gate when the gate is closed.
www.screwfix.com

Smith & Locke Heavy Duty Auto Gate Catch Galvanised 120mm

Order online at Screwfix.com. Steel construction for strength and durability. Galvanised latch for resistance to rust and corrosion. Ideal for securing garden gates. FREE next day delivery available, free collection in 5 minutes.
www.screwfix.com

What I could do with is something to auto-hold gate open ,
Some form of catch, when gate presses against I, it lifts then drops over gate holding it open.
Takes a manual lift or similar to release it to.

Assume they exist anyone know of one or what they are called.
I have found filed gate versions and concrete-on drive gate versions .... just need a garden gate vesrion.
 
Normally they need either a post to fix a catch onto, or a concrete pad to fix a bottom hold on to.
you could have a piece of pipe hammered into the earth to present a tube sticking out of the gate and a bolt style bar that drops into it?
A spring holding it down and a string on the gate to pull it free.

what type of gate?
many use a seesaw type catch
 
It's just a wooden gate ... looking for something that works automatically if you push the gate against it.
In 90-degree open it is up against the house wall
 
I use magnetic-door-holders.
Long bit screwed into brick wall, round bit on gate.
Note that these are meant for inside so mine have corroded.

This link is to SF, but are also avalible from lots of other places.

Error 410 | Screwfix

Thousands of products at low trade prices | FREE next day delivery available | 30 day money back guarantee on all orders.
www.screwfix.com www.screwfix.com
 
I've used the auto gate latches to hold gates open, you'd need a post/fence/etc to attach the latch to, works well though


Also the old classic bit of rope/bent bit of wire but that doesn't work automatically!
 
scbk said:
I've used the auto gate latches to hold gates open, you'd need a post/fence/etc to attach the latch to, works well though


Also the old classic bit of rope/bent bit of wire but that doesn't work automatically!
Click to expand...
Can you give a link to the latch you used ?
 
You must log in or register to reply here.
Back
Top