I've got a project coming up to rewire my daughters pre-cast concrete garage when the weather warms up. The sockets will be located inside, on the joints so I want to avoid drilling the concrete, intending to glue 12mm thick wooden battens about 30mm wide down to another piece the size of a double socket. I'll then screw the trunking and sockets to the timber.
Friends have mentioned CB1, OB1 and there are many others, Gorilla for example. I'm open to any recommendations. Ideally, one that will keep the battens in place once I've held it for a minute or so. There will be some pulling force exerted when withdrawing plugs from the sockets.
Thanks in advance.
Friends have mentioned CB1, OB1 and there are many others, Gorilla for example. I'm open to any recommendations. Ideally, one that will keep the battens in place once I've held it for a minute or so. There will be some pulling force exerted when withdrawing plugs from the sockets.
Thanks in advance.
