Haes fire alarm panel
- Thread starter Neil a
- Start date
Don’t do fire but what outputs or relays does the fire panel have?
Is the fire panel already wired to the alarm panel?
The SD1also?
The sd1 uses a standard phone line which won’t be available in the near future but that aside.
There are switches negative outputs you could wire in says they are programmable so not sure what the options are without referring to the fire alarms manual.
The sd1 uses a standard phone line which won’t be available in the near future but that aside.
There are switches negative outputs you could wire in says they are programmable so not sure what the options are without referring to the fire alarms manual.
Why does it look like the sounders are wired in alarm cable 
……?
……?Because you said it was ok to use alarm cable for sounders …Why does it look like the sounders are wired in alarm cable
Yes the dialler is powered from alarm panel thanks
No I said it …SHOULD BE FITTED WITH FIRE CABLE …
Looks like a mouse has chewed the ends of the cable.
Safety comes first the whole thing should be disconnected and installed correctly.
Diy or not I would not risk the Safety of my family with that.
Hope you are not putting 999 in the dialler.
Safety comes first the whole thing should be disconnected and installed correctly.
Diy or not I would not risk the Safety of my family with that.
Hope you are not putting 999 in the dialler.
And after that I asked could I use alarm cable at which you replied YES !