Hayter 48 Remove Pull cord cover ?

Joined
5 Jan 2010
Messages
671
Reaction score
49
Location
Norfolk
Country
United Kingdom
Hayter 48 Remove Pull cord cover

How do I remover this cover ? have attached pictures
As I want to rub down rust and spray black.
thanks for any help
 

Attachments

  • Plull cord 1.JPG
    Plull cord 1.JPG
    403.7 KB · Views: 92
  • Pull cord 2.JPG
    Pull cord 2.JPG
    291.8 KB · Views: 70
  • Pull cord 3.JPG
    Pull cord 3.JPG
    352.8 KB · Views: 95
  • Pull cord 4.JPG
    Pull cord 4.JPG
    292.5 KB · Views: 82
  • Pull cord 5.JPG
    Pull cord 5.JPG
    329.9 KB · Views: 83
The plastic vent screen pops off - put a screwdriver in the outer slots and carefully lever.
The steel cover should have bolts at the top, and also at the back of the engine.
John :)
 
The plastic vent screen pops off - put a screwdriver in the outer slots and carefully lever.
The steel cover should have bolts at the top, and also at the back of the engine.
John :)
Thanks John, Yes I saw the bolts they look easy enough it was removing the cover that foxed me.

Now to rub down and coat with

Hycote Black Engine Enamel 400ml.​

should be a good mower when finished.
 
Back
Top