Help identifying our conservatory roof bars please

[sololite]

Hi,

would anyone recognise these roof bars from our conservatory please. I think it's about 15 years old. looking to replace them like for like if possible as we freshen the whole thing up.

thanks

Chris

 

[Mw Roofline]

Those are screw down timber supported glazing bars instead of snap down. You can’t get those anymore. The nearest alternative would be a sunwood 50mm screw down timber supported glazing bar. The difference would be they come with a bead to cover the screws that hammers in place.
I don’t have a tape measure mind, so make sure you check.

 

[sololite]

Great advice. Thanks for telling me. Really appreciate it.

 

[Robrob12]

I have a similar problem identifying these roof bars! Can anyone help? Thank you

 

[Notch7]

You need to take one off and see if it’s a snap down type or not

You might not get the type but probably will get one to fit

You might need to replace the bit it snaps into which requires deglazing

16mm - 35mm Heavy Duty Self Supporting White Glazing Bar

Our self- supporting glazing bars are typically used for canopies and carports. This glazing bar is suitable for 16, 25, 32 and 35mm thickness. The polycarbonate sheet is placed between the bars, the PVC top cap is then clicked down into position. We recommend the maximum unsupported projection...

www.thepolycarbonatestore.co.uk