Help with door handle

[Nicolafrey]

Hey need some help with these handles! Ordered some new ones but not able to get the old ones off ha!
All I've done is remove the screws but have no idea how to take the handle off or anything! Hope the pictures are clear enough!!
Would appreciate any advice
Thank you!!
[GALLERY=media, 98484]20161008_215515 by Nicolafrey posted 8 Oct 2016 at 10:00 PM[/GALLERY]
[GALLERY=media, 98483]20161008_215546 by Nicolafrey posted 8 Oct 2016 at 10:00 PM[/GALLERY]
[GALLERY=media, 98482]20161008_215601 by Nicolafrey posted 8 Oct 2016 at 10:00 PM[/GALLERY]
[GALLERY=media, 98485]20161008_215613 by Nicolafrey posted 8 Oct 2016 at 10:00 PM[/GALLERY]

 

[Burnerman]

One of the brass knobs will have a grub screw, holding them on to the spindle that passes through the lock.
Undo that and one knob will come off, allowing the other to pull through.
John

 

[Nicolafrey]

Thank you!! I'll have to try and find it when I get home! Hope it's as easy as it sounds

 

[Burnerman]

No worries.....usually the screw is on the underside of the knob where it can't be seen, and the spindle passing through the lock is square.
Be lucky
John

 

[Doggit]

I think these are much older, so if you scrape the paint off of the handle, you'll find a couple of screws holding the plate on.

 

[crank39]

I think these are much older, so if you scrape the paint off of the handle, you'll find a couple of screws holding the plate on.

Like here.....