- Joined
- 23 Sep 2004
- Messages
- 8
- Reaction score
- 0
- Country
Is there such a thing as 2 x 1 1/2 size timber?
Or will i have to have it cut somewhere?
Or will i have to have it cut somewhere?
help with timber
- Thread starter bluemoon32
- Start date
depends on how acurate you need the meassurements to be
your wood yard will normally machine you wood to the exact size
if you need it to be accurate at 1.5 inches [but not the 2 inches]
you could glue together 2 bits of 2 by 1 inch planed[1.5 by 1.75 inch]
plained wood comes out smaller than size due to plaining
so 2 by 1 come out about 45 by 20 [45 by 18 at b+q wicks ect]
your wood yard will normally machine you wood to the exact size
if you need it to be accurate at 1.5 inches [but not the 2 inches]
you could glue together 2 bits of 2 by 1 inch planed[1.5 by 1.75 inch]
plained wood comes out smaller than size due to plaining
so 2 by 1 come out about 45 by 20 [45 by 18 at b+q wicks ect]
Is this a sawn size, nominal prepared size or exact finished size?
If sawn you should have no problem getting 38x50 both treated and untreated. If finished size then you will have to get it done for you, if nominal ex 1 1/2"x2" then this is readily available but would give a finished size of approx 32x44mm.
Jason
If sawn you should have no problem getting 38x50 both treated and untreated. If finished size then you will have to get it done for you, if nominal ex 1 1/2"x2" then this is readily available but would give a finished size of approx 32x44mm.
Jason