Hive Mini Ideal Vogue Boiler

Chrissyy

Chrissyy

Joined
2 Dec 2022
Messages
11
Reaction score
0
Country
United Kingdom
Hello, first post so be nice. This has probably been posted a million times before but I cannot find what I'm looking for.

I have got a Ideal Vogue C26 Gen2 boiler and just purchased a Hive mini thermostat.

I have seen a post with the wiring and videos on YouTube however when I have connected the cables etc it's not responding the the boiler and turning on the heating.

One video on YouTube said about a link cable on the receiver from live to 1 however there's no cable from the receiver going into the boiler on the video.

Any ideas what I'm doing wrong?
 

Attachments

  • 20221202_093300.jpg
    20221202_093300.jpg
    211.2 KB · Views: 130
  • 20221202_093319.jpg
    20221202_093319.jpg
    183.6 KB · Views: 111
Can you post a photo of the front of your boiler? Make sure you get the boiler checked for safety afterwards from opening it up. What was the existing that you’ve replaced?
 
It's an ideal wireless thermostat currently installed
 
Do you have a diagram on this? How do I set to maximum?
 
Where is the wiring for the thermostat receiver, or is it built in to the front of the boiler?
 
See attached
 

Attachments

  • 20221202_140109.jpg
    20221202_140109.jpg
    190.2 KB · Views: 128
  • 20221202_140104.jpg
    20221202_140104.jpg
    139.2 KB · Views: 104
Is this how it should be?
 

Attachments

  • 20221202_152621.jpg
    20221202_152621.jpg
    196.5 KB · Views: 91
  • 20221202_093300.jpg
    20221202_093300.jpg
    211.2 KB · Views: 97
post a pic of the hive mini , looks like it is not binding with the receiver, it is wired correctly, post a pic of the receiver when the thermostat is calling for heat too
 
I have disconnected it for now. The mini was talking to the app on my phone and the correct green lights came on the receiver but the boiler didn't fire up?
 
You must log in or register to reply here.
Back
Top