Honeywell CP042 Touch Center

[deedpopo]

Hi,
All working well with custom home screen and text but how do you add a control device?

I imagined I could just add a button to activate an output to open a gate or something but can't for the life of me find how to program it in?

Is there any information on editing the whole thing? I know its low-res but it still seems like a good idea which hasn't been fully taken advantage of, there must be more I can do than use it as a glorified keyprox with a nice picture, especially considering how much it is meant to cost!

 

[omega015]

For control via the touch center you need to set the RIO output to control mode ON - 53.6.1. To show status its 53.6.2

 

[deedpopo]

Darn, how did I miss that

Thanks a lot, now if only I could edit the graphics so that it's a picture of a gate instead of a light bulb.

Is there a setting to turn the display of the RIO address next to the icon off? Would make it a bit end-user friendlier.

Actually while I'm here, 2 other questions...

1. Is there a way to get the chime zone to display when activated either on the touch or MK7, I thought 51.63 and 51.69 would allow this.

2. Is it possible to trigger the touch screen backlight to come on? my idea was to link it to the hall zone so that it would light up as you approached it.

Also does anyone have a non UK firmware that would enable the LEDs?

Thanks again.