Honeywell galaxy G2 RF_FAIL

[hello!]

Hello, could someone help me? I have a Honeywell Galaxy G2 20 (non ADT) system and I keep getting an RF fail. I have already replaced the G2 20 with a spare, but the error keeps coming back. The RF portal is old and there is no address potentiometer yet. the system has 2 keypads 2 wired zones 16 wireless zones 1 RF portal I think the RF portal may be broken, does anyone know a solution? Thanks in advance

 

[GalaxyGuy]

What is the actual error logged?

 

[hello!]

Its just rf fail twice for all 16 zones so 32 rf fail errors

 

[GalaxyGuy]

It's difficult to tell what's happening without seeing the sequence of events in the log. The portals are cheap enough to just switch out to see if that is the cause. It's unusual for the Galaxy kit to fail like that though. If it was a wiring issue, you would see an RF tamper. If a jam due to external noise, it should show a jam in the log. I think your only option is to try swapping the portal. The latest is version 3.00 and you can pick them up for around £40 on eBay.

 

[hello!]

the portal does not give any sabotage or jamming messages, it simply loses connection with all sensors

 

[Cubkub]

By any chance you recently got a smart meter installed? I have a similar issue and I doubt it is related to the smart meter.