HOTPOINT AQUARIUS WDL540 - FLASHING LIGHTS

K

Kyle Stiens-Magill

Joined
22 Jan 2022
Messages
2
Reaction score
0
Country
United Kingdom
Hi there,

I have an HOTPOINT AQUARIUS WDL540 and the lights and flashing on the front face and machine has stopped working.

I've taken the off the back panel and unplugged the PCB trying to see if I can find any visual issues.

I've attached photos.

Any advice would be appreciated.
 

Attachments

  • PXL_20220122_172744810.jpg
    PXL_20220122_172744810.jpg
    388.5 KB · Views: 114
  • PXL_20220122_172746905.jpg
    PXL_20220122_172746905.jpg
    412.5 KB · Views: 104
  • PXL_20220122_172749325.jpg
    PXL_20220122_172749325.jpg
    349 KB · Views: 80
  • PXL_20220122_172758279.jpg
    PXL_20220122_172758279.jpg
    280.5 KB · Views: 83
  • PXL_20220122_172810536.jpg
    PXL_20220122_172810536.jpg
    285.8 KB · Views: 85
  • PXL_20220122_172837258.jpg
    PXL_20220122_172837258.jpg
    243.8 KB · Views: 82
  • PXL_20220122_172847913.jpg
    PXL_20220122_172847913.jpg
    208.8 KB · Views: 99
Just have an update. Ended up calling an engineer out as it was only £30.

Was nothing to do with the capacitor or board. The brushes were worn down and needed replacing and there was also an issue with the door lock. All in including call out fee £100.
 
You must log in or register to reply here.
Back
Top