- Joined
- 15 Jun 2019
- Messages
- 2
- Reaction score
- 0
- Country
Well...
I very stupidly put washing up liquid into my Hotpoint Futura dishwasher when I ran out of tablets. After hearing a beeping from the kitchen I discovered a small amount of water leaking out of the front of the machine and the inside was a soapy mess.
It hasn't worked since and I can't seem to find the solution. I've cleaned out all of the foam and tilted it in all directions to try and remove any excess water.
After removing the bottom panel I can see that the float is dry and working correctly, and the base is completely dry.
Despite this, when starting the cycle the pre-drain begins as normal but no water enters the machine. At the point at which water should enter the machine beeps and the Washing light flashes. After this it stops beeping and the Drying and End lights turn on. From this point the machine loops a constant drying cycle.
I can't afford a new one or a fix at the moment. Does anyone have any ideas what I could try next to get it working again?
I very stupidly put washing up liquid into my Hotpoint Futura dishwasher when I ran out of tablets. After hearing a beeping from the kitchen I discovered a small amount of water leaking out of the front of the machine and the inside was a soapy mess.
It hasn't worked since and I can't seem to find the solution. I've cleaned out all of the foam and tilted it in all directions to try and remove any excess water.
After removing the bottom panel I can see that the float is dry and working correctly, and the base is completely dry.
Despite this, when starting the cycle the pre-drain begins as normal but no water enters the machine. At the point at which water should enter the machine beeps and the Washing light flashes. After this it stops beeping and the Drying and End lights turn on. From this point the machine loops a constant drying cycle.
I can't afford a new one or a fix at the moment. Does anyone have any ideas what I could try next to get it working again?