Hi All, I have an issue with my Hotpoint LTF 11M132 that would be great to get some advice on. Dishwasher previous worked for 2 years trouble free prior to this.
About 30 seconds after closing the door the washer beeps as per the video below. It intermittent beeps for 2 minutes as video below before appearing to start the cycle, taking water in etc.
If i leave the dishwasher ignoring the intermittent beeping it eventually tries to continue on for 5 minutes before going in to this mode with the dishes inside wet:
It will continue doing this until turned off manually.
Things i have checked -
About 30 seconds after closing the door the washer beeps as per the video below. It intermittent beeps for 2 minutes as video below before appearing to start the cycle, taking water in etc.
If i leave the dishwasher ignoring the intermittent beeping it eventually tries to continue on for 5 minutes before going in to this mode with the dishes inside wet:
It will continue doing this until turned off manually.
Things i have checked -
- Water does get in to the dishwasher, does not appear to be a pressure issue.
- Have removed filters etc from the inside of the dishwasher to see if there is any blockage.
- Have checked drain pipes - does not appear to be an issue draining.
Last edited: