Hotpoint Smart tech F05 fault?

[Bing]

Hi all.
I have had this problem for a few months now. I have removed the Filter cover at the bottom & checked that it rotates freely & no coins or hair clips present. It always seams to stop 20 minutes from the end of the cycle but not always. I've tried it all the different settings but still the same. I noticed that if I tilted the machine & dropped it. it would work for a couple cycles & then the same fault. Also if I removed half the load it would do a cycle but it wasn't over loaded?
any suggestions would be greatly appreciated?

Bing.

 

[jj4091]

F05 on older hotpoint was a pressure switch problem. Not familiar with your model but it's probably worth checking that area. They used to have the switch on top of the drum with a pipe that ran down to the drain pump. This occasionally blocks & prevents the switch actuating properly.