How to make hole in wall for cctv?
- Thread starter jcaan
- Start date
That kind of depends on what cable your using.
The smallest holes for example are for poc (rg59) or cat 5 there are different grades of cable available too.
Bigger cables for rg59 shotgun and cat6 and bigger still if they are pre terminated as they also have to be feed through the hole.
The smallest holes for example are for poc (rg59) or cat 5 there are different grades of cable available too.
Bigger cables for rg59 shotgun and cat6 and bigger still if they are pre terminated as they also have to be feed through the hole.
So as a BNC connector is about 15mm in diameter you are going to need a hole at least 16mm and bigger if two or more cables have to go through.
www.toolstation.com
SDS Plus 1m Drill Bit
Drill deep into a variety of surfaces with this 1m SDS Plus drill bit from Toolpak. The long-reach bit is designed for use with SDS Plus rotary or percussion drills – it features a two-flute design for precise, clean holes and a tungsten carbide tip for an extra-long life.• Extra-long 1m drill...
www.toolstation.com
Unless you pass the cable and add the bnc connector after requiring smaller hole , though better to find a route avoiding need to drill .