How to remove the kick panel of a SMEG Dishwasher model DWA6314B

[vishalv]

We have the "anti-flooding" E1 error showing on our SMEG dishwasher and while researching on the issue, I read that this happens because there's some water logged underneath which is tripping the anti-flood switch. Now, I need to access this area by first removing the kick panel and I can't seem to figure out how to do it. As you will see from the picture, there are no visible screws on front or on the side of it. The panel just appears to be attached to another steel panel behind it.

Any help to solve this is greatly appreciated.

Thanks!

 

[vishalv]

here's another picture from the side, to show there are no screws. Sorry for the dirty floor.

 

[Eccles]

My guess is if you can't see any screws it's just a push fit and a good yank will get it off but there is a web site here where Paul has loads of vids and tips to solve appliance problems:- https://www.how-to-repair.com/help/contact-us/

 

[DiyNutJob]

Look for service manuals. There might be screws underneath. You might have to remove all the surrounding pieces before you have access to it.

 

[assuhors]

It comes off sideways.