- Joined
- 23 Nov 2017
- Messages
- 45
- Reaction score
- 0
- Country
I live in a relatively new house, circa 1990, and wish to install a wood burning stove into the lounge. As the house does not have a chimney a double lined aluminium chimney needs to go out then up the external wall at the side of the house (above my land).
I've spent ages googling and reading and can state the following:
My question is do I need planning permission to install this new chimney/flue?
My house has 'an article 4 directive meaning there are no permitted development rights'. Annoyingly I have spoken to Oxford council planning (they have a drop in service) and was informed that I would need to pay £40 for some provisional planning application advice and they couldn't say?!.
My HETAS installer states that he really isn't sure and that I should check with planning. The local stove shop have told me I do not need permission.
I'm concerned that the month turn around and £40 for written advice from the council will extend the project and equally increase the cost as in this case planning applications are free (except for drawings). If I do apply for planning and its not needed I have wasted the fee for drawings and also potentially waited ages!
If anyone knows any more about this stuff / has any advice it will be well appreciated.
Thanks
I've spent ages googling and reading and can state the following:
- The front of my house faces the road and chimney/flue will not be on this aspect (it will be the side). It won't go more than one meter above the roofline.
- The house needs a DEFRA approved stove as its in a 'smoke control area under the clean air act 1956'.
- It is not in a conservation zone.
- I have a HETAS engineer to install and sign the appliance off.
My question is do I need planning permission to install this new chimney/flue?
My house has 'an article 4 directive meaning there are no permitted development rights'. Annoyingly I have spoken to Oxford council planning (they have a drop in service) and was informed that I would need to pay £40 for some provisional planning application advice and they couldn't say?!.
My HETAS installer states that he really isn't sure and that I should check with planning. The local stove shop have told me I do not need permission.
I'm concerned that the month turn around and £40 for written advice from the council will extend the project and equally increase the cost as in this case planning applications are free (except for drawings). If I do apply for planning and its not needed I have wasted the fee for drawings and also potentially waited ages!
If anyone knows any more about this stuff / has any advice it will be well appreciated.
Thanks
