just replaced a defective pentangle shower tray with a stone resin quadrant tray 1000x1000mm (radius 550mm).
The old tray was fitted butted against the tiles (which went to the floor), and not underneath them, so it leaked.
I have cut away tiles so that new tray slides underneath.
I now have to deal with exposed floor ply to left and right of tray where it doesn't cover the outline of the old tray.
Customer wants a white trim but it needs to be about an inch wide and has to 'form' around the radius of the tray.
I have a couple of ideas but this involves layers to build up the thickness.
Any of you good ppl have any suggestions or know of a bendy strip that will do this in one application?
Many thanks, photo below...
The old tray was fitted butted against the tiles (which went to the floor), and not underneath them, so it leaked.
I have cut away tiles so that new tray slides underneath.
I now have to deal with exposed floor ply to left and right of tray where it doesn't cover the outline of the old tray.
Customer wants a white trim but it needs to be about an inch wide and has to 'form' around the radius of the tray.
I have a couple of ideas but this involves layers to build up the thickness.
Any of you good ppl have any suggestions or know of a bendy strip that will do this in one application?
Many thanks, photo below...
