Hi there,
So I tried the pressure sensor fix from another old thread for the 11 flashes (error code FA).
It worked again for 3 cycles but now back to 11 flashes. My sensor was clean anyway, so wasn't 100% it was that.
I read somewhere else that as this model doesn't have an optical sensor (error FA) then its probably something else such as this in the photo.
To be honest I haven't got a clue what this is or how to get it off, IF i can get it off.
I know one of the channels has water in it still and on the close up that channel leads to the 3rd outlet/inlet on the right. They all have black rubber washes at the bottom but the 3rd one has water in it and trying to get out, as if the seal is loose or broke etc.
Any help appreciated before it gets tipped!
So I tried the pressure sensor fix from another old thread for the 11 flashes (error code FA).
It worked again for 3 cycles but now back to 11 flashes. My sensor was clean anyway, so wasn't 100% it was that.
I read somewhere else that as this model doesn't have an optical sensor (error FA) then its probably something else such as this in the photo.
To be honest I haven't got a clue what this is or how to get it off, IF i can get it off.
I know one of the channels has water in it still and on the close up that channel leads to the 3rd outlet/inlet on the right. They all have black rubber washes at the bottom but the 3rd one has water in it and trying to get out, as if the seal is loose or broke etc.
Any help appreciated before it gets tipped!