Increase petrol mower rpm

[ipbr21054]

Ive had to route my throttle cable slightly as each time i was putting the basket on it would always be in the way.
I can move the throttle lever then at a certain point the revs do not get any higher even though im mover the lever.

I just know it can rev more than like so at present i walking a lot slower than normal.

My sketch shows the outer cable, the inner cable & the clamp which holds things in place.

Can you advise which part outer or inner needs to be moved & towards the carb or away from carb.

Just to bring the revs up a touch.

Thanks

 

[Harry Bloomfield]

It will be rev limited by a governor. The throttle control is just to select tick-over or full speed.

 

[ipbr21054]

So the rev limiter i will look at in the morning thanks

 

[Burnerman]

Move the outer cable, held by the clamp, as far as you can to the right - without the choke coming on.
After that it’s a governor tweak but I’d need detailed pics for that!
John