Intermediate Switches

G

Gozza

Joined
3 Jul 2016
Messages
3
Reaction score
0
Country
United Kingdom
Is it possible to use a 2 gang,2 way as an 2 switch intermediate ? I am looking to change all the switches in the house and I can't find a 2 switch intermediate in the range I am looking at. And I notice that 2 switch intermediates seems to be very rare. Assume there is a different approach to wiring. Any help gratefully received

Iain
 
So I have to use specific Intermediate switched, yes?? I am still confused that there are not many available. Plenty of single switch, but very few 2 switch. Any reason for this?
 
Not really a reason. There are some.

Do you actually need two intermediate switches on the one face plate?
 
What kind of switches are you buying?

Are the actual switch units detachable from the faceplates?
 
Gozza said:
Is it possible to use a 2 gang,2 way as an 2 switch intermediate ?
Click to expand...
Asking that question betokens an inadequate understanding of how switches work, how they are used, how lighting circuits are wired, etc.
 
Thanks for all the feedback.
1. Yep married and yes a request from her ladyship :D. But to be fair, the existing ones are cracked, yellow and pretty crappy.
2. Yes need 2 switches on same faceplate
3. I have bought LAP Brushed Steel (Flat screwed types) from Screwfix, on the basis that they had decent reviews, look pretty good and are significantly cheaper than the Varilight option.
4. However, I have just found that Varilight do something similar and as the switches are a fair way apart I'll get one and see if its a decent match

Next time I have a multi-switched light I'll do my homework first. Thanks all
 
It is in essence an reversing switch, non domestic would have 6 terminals and one has to cross wire the outer terminals, with the domestic intermediate switch this is done for you. I also had problems finding three gang intermediate but could find 2 gang, so I arranged to wiring to suit.

Today we have wireless switches and also the dimmer switches now come as master and slave, so you can fit as many dimmers as you want to the same circuit. See this example there are others which do similar things.
 
As EFL Impedance hinted above, sometimes you can remove the switches from the back of a 2 gang and fit 2 intermediates as you need, by buying two 1 gang intermediates.
 
You must log in or register to reply here.
Back
Top