Is there some reason a loft in a 2nd floor flat has plasterboard seperating the section above the s from the rest of the loft? Maybe fire regulations?

G

Gary111

Joined
11 Oct 2016
Messages
816
Reaction score
8
Country
United Kingdom
There is a section just above the stairs that is double plaster boarded with inspiration in between the plaster boards.
There is an old velux window with a lath and plaster surround at the top.

I am wondering if the double plasterboard and insulation is a fire regulation?

Thanks
 
I think you're right. We had to build a 'party wall' in our terrace house loft years ago to mitigate the spread of fire. Building regs!
 
Pfft those poxy Building Regs Nazis always trying to make buildings better/safer. Screw 'em I say, are you with me brother?
 
freddiemercurystwin said:
Pfft those poxy Building Regs Nazis always trying to make buildings better/safer. Screw 'em I say, are you with me brother?
Click to expand...
Don't get me wrong. Building regs are needed of course, but sometimes their demands are unreasonable. One example is the insistence on the use of hellishly expensive Celotex, Kingspan etc. You'll probably know that after 7 years, the thermal properties of this stuff drops to the point where it's equal to Jablite EPS, which costs circa 75% less. That's a big hit for a young couple trying to do a loft conversion.
But yes, some inspectors can get a little... power crazy! Lol
 
Allegedly, the conductivity figures for Kingspan etc quoted in the spiel apparently allow for the off gassing over time. At least that's what BS EN 13165 states.
:censored:
 
Last edited:
noseall said:
Nonsense.
Click to expand...
Apparently not. This from 'Insulation UK' (if you're interested):
'Expanded polystyrene will last the lifetime of any building where it’s installed. The thermal performance of EPS does not degrade over time, meaning the U-value you first achieve with EPS will not change. Unlike other insulation materials, like PIR, EPS does not off-gas, meaning the thermal conductivity stated on the Declaration of Performance certificate is what you’ll receive.'
 
Ollyfp said:
Apparently not. This from 'Insulation UK' (if you're interested):
'Expanded polystyrene will last the lifetime of any building where it’s installed. The thermal performance of EPS does not degrade over time, meaning the U-value you first achieve with EPS will not change. Unlike other insulation materials, like PIR, EPS does not off-gas, meaning the thermal conductivity stated on the Declaration of Performance certificate is what you’ll receive.'
Click to expand...
I'm disputing the mythical PIR figures not the EPS ones. I wonder which vested interest, rival insulation company, came up with the numbers you claim? Let me guess - an EPS company perhaps?

Ollyfp said:
after 7 years, the thermal properties of this stuff drops to the point where it's equal to Jablite EPS,
Click to expand...
 
I've fully renovated six properties and our inspector has acknowledged the fact that the performance of PIR drops significantly after 7-10 years, but he still wouldn't allow the installation of EPS as a substitute because, although that would make financial sense to those who plan to stay long-term in their properties, it wouldn't help the country's 'Net Zero' figures in the short-term.
My most recent project escaped the scrutiny of BC so my insulation bill has dropped by circa 66%. We're staying here, so that works perfectly.
 
noseall said:
I'm disputing the mythical PIR figures not the EPS ones. I wonder which vested interest, rival insulation company, came up with the numbers you claim? Let me guess - an EPS company perhaps?
Click to expand...
The company sell EPS and PIR, so it's not in their interests to promote one over the other.
 
Ollyfp said:
I've fully renovated six properties and our inspector has acknowledged the fact that the performance of PIR drops significantly after 7-10 years,
Click to expand...
I've not heard any BCO's mention this (significant loss) at all.
 
You must log in or register to reply here.
Back
Top