JTP vs Harbour - any views?

1. Never heard of either make. Could be my ignorance, could be some generic Far Eastern import with no spares available.
2. Note that both are minimum 1 bar pressure, so unless you have a combi boiler, an unvented hot water system or a thermal store they are unlikely to work properly if at all. I.e. if you have a conventional hot water system with cold tank in loft and hot water cylinder in first floor your pressure will likely be 0.5 bar or less. Unless you are in a property of more than two storeys.
 
just an aside, they both require minimum of 1bar pressure - do you have that for your hotwater ?
i have had issues with a gravity system and only use low pressure taps , and these would not work very well for me
Just in case ... thought i would mention
 
As above never heard of either
If you really must have a pull out spray (I've found them to be absolute crap taken a number out) have a look at Bristan they will at least still be about when you need spares.
 
Just Taps are decent enough, never heard of Harbour. You'd be better off going for established makes like Bristan or Franke though
 
You must log in or register to reply here.
Back
Top