Hi all, after a bit of advice. We’re coming to the end of a new kitchen installation along with a new lighting design scheme as part of the project. Through research we decided to go with the lightwave system mainly because we have Apple devices.
We have a 4 gang switch which isn’t coping with the circuits, I’m guessing because there are too mainly lights on one circuit in particular (13 @ 10w LED). Put all gangs on and well
If you suffer from epilepsy you wouldn’t be able to enter the room. Does anyone have any experience with Lightwave and if so are there any fixes like reducing the bulbs to 7w LED etc? I’ve tried manually restricting the brightness but to no avail. Very frustrating especially when we have spent a considerable amount of money on our new room. Is there a different system which can take higher loads?
Have attached the spots we have installed.
Any help greatly appreciated as we’re starting to become pretty deflated about it all!
Thanks, Chris
We have a 4 gang switch which isn’t coping with the circuits, I’m guessing because there are too mainly lights on one circuit in particular (13 @ 10w LED). Put all gangs on and well
If you suffer from epilepsy you wouldn’t be able to enter the room. Does anyone have any experience with Lightwave and if so are there any fixes like reducing the bulbs to 7w LED etc? I’ve tried manually restricting the brightness but to no avail. Very frustrating especially when we have spent a considerable amount of money on our new room. Is there a different system which can take higher loads?
Have attached the spots we have installed.
Any help greatly appreciated as we’re starting to become pretty deflated about it all!
Thanks, Chris
