Hi guys
So I have made an PD application for a loft conversion to my local council recently. Talking to my architect, the one issue I’m going to be faced with is the height. So I’ve agreed to drop the ceilings on the 1st floor down 200mm but with even doing that, I’m still looking at only getting a max of 1.9m headroom in the loft. The architect is going to try and play with the figures but he mentioned that I will be having a cold deck flat roof and we’ll need to use 150x50mm rafters for the span. Now to achieve the 0.18W/m2K required, he said we’ll need to use 100m insulation between the rafters – he said something about leaving a 50mm air gap plus a further 50mm on the underside. I know 50mm doesn’t sound a lot but would there be something on the market that would allow me not to have that additional insulation?
Any advice would be grateful
Thanks
So I have made an PD application for a loft conversion to my local council recently. Talking to my architect, the one issue I’m going to be faced with is the height. So I’ve agreed to drop the ceilings on the 1st floor down 200mm but with even doing that, I’m still looking at only getting a max of 1.9m headroom in the loft. The architect is going to try and play with the figures but he mentioned that I will be having a cold deck flat roof and we’ll need to use 150x50mm rafters for the span. Now to achieve the 0.18W/m2K required, he said we’ll need to use 100m insulation between the rafters – he said something about leaving a 50mm air gap plus a further 50mm on the underside. I know 50mm doesn’t sound a lot but would there be something on the market that would allow me not to have that additional insulation?
Any advice would be grateful
Thanks