M12 detectors

[crossleymarko]

Ive been rooting around looking for favoured ways to wire M12's to a texecom 48 panel,
i found the manual, below.. courtesy of @gingerangles.
https://www.diynot.com/diy/threads/wiring-manvier-m12.546783/.

can anyone tell me the best way to wire to an elite 48, do i need to use EOL .i was looking at the second one down on the right. with the E terminal? is Tamper even necessary .
and could you tell me how is detector reset is handled on the elite 48,

Edit.

i thought i would give a guess .. what do you guys think.. Fire zone being Alarm on the 48
Go easy.. hahah.

 

[secureiam]

Normally closed or double pole. Sure this is mentioned on here before certainly a big discussion on the Texecom forum about behaviour.

E is to join tampers together by the looks of things, tamper is good for determining head removed.

detector reset not sure cant remember if I have ever used it to be honest.

 

[crossleymarko]

thanks mate,

so what would the wiring options be please?? on the manufacturers diagram

 

[Handymanjo]

Use double pole wiring format
Alarm zone to fire zone on detector
Link put tamper on zone
Setup output for detector reset on aux power.

 

[crossleymarko]

Setup output for detector reset on aux power.

how do you set output for detector? please

 

[crossleymarko]

Hi

I just thought I would bring this one back to life as the original Poster.
I am now looking to wire in the M12 units,
Could someone please tell me wich should I wire to, and a a bit direction for setting up the output for aux power that was mentioned.

And also we're Would the resistors go please.

 

[crossleymarko]

Please anyone?

 

[crossleymarko]

Can some one please help,

 

[sparkymarka]

Can’t be any rush after 2 years ? Lol

 

[sparkymarka]

Anyway if it’s a premier 48 just 4 wire two for the relay and two twisted together wired under the E terminal , program a ouput for detector reset and wire into the 0v

 

[crossleymarko]

Haha.. had lots on sparky, college etc.. wifes pushing to get stuff finished. Had wires hanging out the ceilings for 2 years

 

[crossleymarko]

Anyway if it’s a premier 48 just 4 wire two for the relay and two twisted together wired under the E terminal , program a ouput for detector reset and wire into the 0v

M12 have auto reset??

 

[sparkymarka]

Yes ….ok if only one smoke detector on a zone

 

[crossleymarko]

Yes every one on its own zone , auto reset set on smoke head.