MAX ILL-Code / WRONG CD (Galaxy Dimension with Keyprox Mk7)

[lsprx]

Good afternoon,

I've noticed that either of my Keyprox Keypads will sometimes generate ILL-CODE events when used to unset the system.
Occasionally, it will generate WRONG CD events at the same time as the ILL-CODE events.

It's been doing this for quite a while, but it doesn't affect the unsetting process and does not create an alarm activation.

I'm just wondering what causes this.

Cheers

 

[lsprx]

Bumping this - today I got both "WRONG CD" and "ILL-Code", which caused a "2 Alarm Activations" message on the keypad.
The use of the keyfob CANCELled too. The alarm did not go off at all.

Cheers

 

[GalaxyGuy]

The log should show which device the illegal code is coming from. If it's a specific keypad, check that the diags are showing 100%. I've seen this with a faulty keypad, but it can also happen with prox readers placed near a transmitting device. Start by pulling the log.

 

[lsprx]

The log should show which device the illegal code is coming from. If it's a specific keypad, check that the diags are showing 100%. I've seen this with a faulty keypad, but it can also happen with prox readers placed near a transmitting device. Start by pulling the log.

Hi GalaxyGuy, thanks for your reply.
The Illegal Code will come from which ever keypad is used. The diags show 100% to both keypads and their associated MAX.
Both keypads are not close to anything that should cause interference.