There's a piece of flappy bit under the rear parcel shelf that I could not work out the purpose. On the car I am looking at, the flap hangs down flat. From this YT video it's configured as a roll. Anyone knows what it is for? At the bottom of the flap are two clips. Not sure where these clip on to.
Micra K12 boot flappy bit
- Thread starter DiyNutJob
- Start date
I think the roll clips to the back seats when they are in the folded down position.
John
John
Not quite folded down
The rear seats can slide forward for increased luggage space, hence the need for an occasional additional loadspace cover
Good call.....I had one of these as a courtesy car but it was a base model on an 06 plate.
I don’t think the seats slid on that one.
John
I don’t think the seats slid on that one.
John
- Joined
- 6 Sep 2004
- Messages
- 1,066
- Reaction score
- 71
- Country
I think the idea is that if you required to use the hatch space to carry a disposable load some distance when you have dumped the load you have the option of retaining some privacy of the hatch contents. Of course, this presupposes that it may be inconvenient to store the parcel-shelf elsewhere in the car. Vaguely plausible or utter boǀǀocks? Your call. 
Here's a short thread about it. But, I am unable still to understand the purpose of it.
www.micra.org.uk
Parcel shelf for adjustable rear seat
Hi folks, how does the parcel shelf fit on a car with adjustable rear seats? Ie how does the material bit fit to the seats? Sent from my SM-G960F using Tapatalk
www.micra.org.uk
