I have a problem with a Neue dishwasher, wondering if anyone has any ideas. A quick Google doesn't reveal much.
Regardless of program selected, the dishwasher starts running - fills up with water, makes cleaning noises for a few minutes, then starts beeping and pumps out the water (doesn't appear to be hot). All the LEDs blink together, roughly in time with the beeps. It keeps beeping until turned off - the beep is a single beep for about a second, then a second of pause, then beep again.
Anyone had this before? There is a similar thread here but no response. My dishwasher is 2.5 years old and out of warranty.
Regardless of program selected, the dishwasher starts running - fills up with water, makes cleaning noises for a few minutes, then starts beeping and pumps out the water (doesn't appear to be hot). All the LEDs blink together, roughly in time with the beeps. It keeps beeping until turned off - the beep is a single beep for about a second, then a second of pause, then beep again.
Anyone had this before? There is a similar thread here but no response. My dishwasher is 2.5 years old and out of warranty.
Bewildering Neue Candy-Hoover 1L380B-80 Error
Hi, We have recently installed a new kitchen and have an integrated Neue 1L380B-80 dishwasher all setup and ready to go. ish... We've so far managed to get one wash out of it before it has suddenly stopped working. The problem is this: The machine is switched on using the touchpad on/off...
www.diynot.com