No light (spotlights) in a room

G

greedy79

Joined
7 Dec 2019
Messages
4
Reaction score
0
Country
United Kingdom
Hi, I’m looking for help, I’m not electrician, the problem what I have got is..... I have 3 spotlights in a room and suddenly all of them stopped working, i replaced bulbs but still nothing.
I bought it voltage tester , unscrewed light switch in a room , checked power but there isn’t power there. Any clues? Thanks for any help
 
greedy79 said:
Hi, I’m looking for help, I’m not electrician, the problem what I have got is..... I have 3 spotlights in a room and suddenly all of them stopped working, i replaced bulbs but still nothing. ... I bought it voltage tester , unscrewed light switch in a room , checked power but there isn’t power there. Any clues? Thanks for any help
Click to expand...
Welcome to the forum.

Have you checked that nothing has 'tripped' in your consumer unit (aka 'fuse box')?

Kind Regards, John
 
Yes I have checked, room is on a 1st floor, I have light in other rooms(same floor)
 
greedy79 said:
Yes I have checked, room is on a 1st floor, I have light in other rooms(same floor)
Click to expand...
Fair enough.

What sort of bulbs are they - mains voltage or some sort of 'extra low voltage' (commonly 12V or thereabouts)? If the latter, then all three might be fed by one transformer/power supply, in which case it's failure would kill all three lights. How old are the lights?

Kind Regards, John
 
Bulbs are gu10, spotlights looks a little bit old, I’m moved to the house last year. I bought it new spotlights in Screwfix today, I thought spotlights looks a little bit old and that might be a reason.
But when I checked a power in light switch and I find out there isn’t any power there I just give up. No power in a light switch? Can that be a spotlights fault?
 
greedy79 said:
But when I checked a power in light switch and I find out there isn’t any power there I just give up. No power in a light switch? Can that be a spotlights fault?
Click to expand...
Not really - other than if a connection at the lights has gone wrong. What is this 'voltage tester' you bought, and how are you using it?

Kind Regards, John
 
LAP voltage detector pen in Screwfix, I tested everywhere in a house( unscrew other light switch-same floor) , works perfectly
 
Look at the old bulbs. What voltage are they?
 
Is there a loft above these lights?

There will probably be a junction of wires behind one spot light. Could be where the fault is.

A pic behind the switch wiring may help.
 
greedy79 said:
I bought it new spotlights in Screwfix today, I thought spotlights looks a little bit old
Click to expand...

It is a waste of time and money buying new items when you have not diagnosed the fault.

Best spend the money on an electrician who will probably find the fault quickly.
 
winston1 said:
It is a waste of time and money buying new items when you have not diagnosed the fault.

Best spend the money on an electrician who will probably find the fault quickly.
Click to expand...

To be fair 3 new downlighters isnt going to be anything like the cost of an electrician.......
 
Notch7 said:
To be fair 3 new downlighters isnt going to be anything like the cost of an electrician.......
Click to expand...
That is true, but if the fault is not the downlighters ( I cannot imagine that three will fail at the same time) then buying new fittings is just
MONEY DOWN THE DRAIN.

(Stop press, I agreed with Winston!)
 
greedy79 said:
LAP voltage detector pen in Screwfix, I tested everywhere in a house( unscrew other light switch-same floor) , works perfectly
Click to expand...
Those magic wands may detect the presence of mains voltage in a conductor. But a lamp needs a neutral and a live connection for it to work.
The fairy wand cannot detect if there is a broken neutral connection, and that is 50% of the faults.
You need a two probe voltage test device, a multimeter (and the knowledge of how to use these) or an electrician.
 
You must log in or register to reply here.
Back
Top